Gardena TwinCut 8830 Operating Instructions Manual - Page 5
Browse online or download pdf Operating Instructions Manual for Trimmer Gardena TwinCut 8830. Gardena TwinCut 8830 11 pages. Cordless lawn trimmer
Print Page
5. Operating Your Cordless lawn trimmer
Cutting Grass :
9
0
8
7
When there is a sharp fall in the power of the cordless lawn trim-
mer, the battery needs to be charged. Do not wait until the blade
comes to an absolute stop.
If the charging socket flashes red during charging, a fault has
occurred (see 8. Troubleshooting).
DANGER !
A
There is a risk of injury if the switching devices
installed on the Shears are removed or bridged
(e.g. by fastening the on switch to the handle).
This prevents the cordless lawn trimmer switching
off automatically.
V Never remove or bridge the switching devices.
The starting lockout prevents your GARDENA
cordless lawn trimmer from being switched on
unintentionally.
Prepare the ground :
1. Clear the area to be cut of stones and other solid objects.
2. Remove the blade guard
Adjust the cordless lawn trimmer :
1. Press the pivot adjuster
the required angle.
Adjust the telescopic
swivel handle :
1. Undo the adjusting
7
nut
, adjust the
handle to the desired
length and tighten
the adjusting nut
again.
2. Undo the adjusting screw
adjust the handle to the
desired height and tighten
the adjusting screw
5
Turning on and off :
1. Disengage the starting lock
press the ON button
again.
2. To turn it off release the ON button
If the cordless lawn trimmer is used without the telescopic swi-
vel handle it can be switched on using the starting lockout
and the ON button
5
from the cutting blade.
6
and adjust the handle to
7
6
8
,
8
again.
9
z
/
by pushing it forwards and
9a
0
z
/
Release the starting lockout
10a
0
.
z
.
10a
z
10a
z
9a
9
z
/
9a
z
9a
13