Gardena TwinCut 8830 Operating Instructions Manual - Page 7
Browse online or download pdf Operating Instructions Manual for Trimmer Gardena TwinCut 8830. Gardena TwinCut 8830 11 pages. Cordless lawn trimmer
Print Page
Cleaning the cordless lawn
trimmer and Oiling the
Blades :
8. Troubleshooting
DANGER !
Risk of Injury !
Replacing the Cutting
Blades :
C
During charging socket
flashes red :
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.
4. Sharpen the blades using a sharpening stone.
5. Fit the blades (see 8. Troubleshooting, "Replacing the Cutting
Blades" ).
To increase the cutting performance and operating life of your
Accu Shears, you should clean and oil them both before and
after every use.
1. Clean your Accu Shears with a damp cloth.
2. Oil the cutting blades with GARDENA Cleaning Spray
Art. No. 2366 or sewing machine oil, for example.
Blades can cause serious injury.
V Do not push the safety lock of the cordless lawn
trimmer forwards when rectifying faults.
If the cordless lawn trimmer do not cut cleanly even after thorough
cleaning, the cutting blades are defective and must be replaced
with new ones.
Please only use original GARDENA cordless lawn trimmer
cutting blades .
D
2 x GARDENA grass blade set
1. Unscrew the 4 screws
pulling it forward.
E
2. Remove the cutting blades
3. Clean the area around the gears and coat the gear wheels with
acid-free grease (Vaseline).
4. Insert the new cutting blades
5. Push the blade holder
C
4 screws
.
A fault has occurred during charging.
v Unplug and reinsert charging cable.
The fault will be reset.
If this does not eliminate the fault, please contact GARDENA
Service.
The batteries are replaceable. Should you require a new battery,
please contact GARDENA Service.
C
and remove the blade holder
E
.
E
.
D
on from the front and fasten with the
Art. No. 2346
D
by
15