KitchenAid KHHC2090SBL3 Installationsanleitung Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Mikrowellenherd KitchenAid KHHC2090SBL3 herunter. KitchenAid KHHC2090SBL3 12 Seiten. Microwave hood combination

Seite drucken

For Roof Venting Installation Only

1. Insert damper assembly through the cabinet cutout so that the

long tab of the damper assembly slides into the slot on the left

side of the damper vent opening, as shown. Then secure with

mounting screw.

NOTE: The screw cannot be installed if the damper assembly is

not positioned as shown.

A. Long tab (inside slot)

B. Damper assembly

C. Mounting screw

D. Upper cabinet cutout

Connect

vent to damper

assembly.

A. Vent

B. Damper assembly (under vent)

The grease and charcoal filters must be installed in the bottom of

the microwave hood combination.

See the User Instructions for

care and replacement information.

A. Retaining spring

B. Filter frame

C. Grease filter (metal)

D. Charcoal filter (black)

To Install Filters:

1. Make sure filters are stacked in the filter frame as shown

above.

2. Install the filters by inserting the wide tab of the filter frame

into the inner portion of the filter housing, then swinging the

outside of the frame up until it fits into place.

A. Filter frame

B. Wide tab

C. Microwave oven bottom

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension

cord.

Failure to follow these instructions can result in death,

fire, or electrical

shock.

1. Plug microwave oven into grounded 3 prong outlet.

2. Reconnect power.

3. Check the operation of microwave oven by placing 1 cup

(250 mL) of water on the turntable, and programming

a cook

time of 1 minute at 100% power. Test vent fan and exhaust by

operating the vent fan.

4. If the microwave oven does not operate:

•

Check that a household fuse has not blown, or that a

circuit breaker has not tripped. Replace the fuse or reset

the circuit breaker. If the problem continues, call an

electrician.

•

Check that the power supply cord is plugged into a

grounded 3 prong outlet.

•

See the User Instructions for troubleshooting

information.

Installation is now complete.

Save Installation Instructions for future use.