KitchenAid KHHC2090SBL3 설치 지침 매뉴얼 - 페이지 10
{카테고리_이름} KitchenAid KHHC2090SBL3에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KHHC2090SBL3 12 페이지. Microwave hood combination
페이지 인쇄For Roof Venting Installation Only
1. Insert damper assembly through the cabinet cutout so that the
long tab of the damper assembly slides into the slot on the left
side of the damper vent opening, as shown. Then secure with
mounting screw.
NOTE: The screw cannot be installed if the damper assembly is
not positioned as shown.
A
B
C
D
A. Long tab (inside slot)
B. Damper assembly
C. Mounting screw
D. Upper cabinet cutout
2.
Connect
vent to damper
assembly.
A
B
A. Vent
B. Damper assembly (under vent)
The grease and charcoal filters must be installed in the bottom of
the microwave hood combination.
See the User Instructions for
care and replacement information.
A
B
C
D
A. Retaining spring
B. Filter frame
C. Grease filter (metal)
D. Charcoal filter (black)
To Install Filters:
1. Make sure filters are stacked in the filter frame as shown
above.
2. Install the filters by inserting the wide tab of the filter frame
into the inner portion of the filter housing, then swinging the
outside of the frame up until it fits into place.
A
B
C
A. Filter frame
B. Wide tab
C. Microwave oven bottom
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
1. Plug microwave oven into grounded 3 prong outlet.
2. Reconnect power.
3. Check the operation of microwave oven by placing 1 cup
(250 mL) of water on the turntable, and programming
a cook
time of 1 minute at 100% power. Test vent fan and exhaust by
operating the vent fan.
4. If the microwave oven does not operate:
•
Check that a household fuse has not blown, or that a
circuit breaker has not tripped. Replace the fuse or reset
the circuit breaker. If the problem continues, call an
electrician.
•
Check that the power supply cord is plugged into a
grounded 3 prong outlet.
•
See the User Instructions for troubleshooting
information.
Installation is now complete.
Save Installation Instructions for future use.
10