A&S Studio Bar 100 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem A&S Studio Bar 100 herunter. A&S Studio Bar 100 14 Seiten.

Use the AUX Socket

A. Use a 3.5mm to 3.5mm audio cable

(included) to connect the TV's or external

audio device headphone socket to the

AUX socket on the unit.

B. Use a RCA to 3.5mm audio cable (not

included) to connect the TV's audio

output sockets to the AUX socket on the

unit.

Risk of product damage!

the power supply voltage corresponds

to the voltage printed on the back or the

underside of the unit.

Before connecting the AC power cord,

ensure you have completed all other

connections.

Connect the mains cable to the AC~

•

Socket of soundbar and then into a mains socket.

When you first connect the soundbar to the mains socket, the main unit will be in Standby mode.

Press the

button on the soundbar or on the remote control to switch the unit ON.

Press the

button again to switch the unit back to STANDBY mode. The indicator will light up red.

Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.

If a TV or an external device is connected, the unit will switch on automatically when the TV or the

external device is switched on.

When the has unit no input signal (or weak input signal) for over 15 minutes, it will automatically

switch to Standby mode.

Press the

button on the soundbar or press the AUX, BT, OPTICAL buttons on the remote control to

select the desired mode. The selected mode will be shown on the function LED'S on the front of the

soundbar.

RED: Power off

BLUE: Bluetooth

Ensure that

GREEN: AUX

WHITE: OPTICAL

- 8 -

AC~