A&S Studio Bar 100 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система A&S Studio Bar 100. A&S Studio Bar 100 14 сторінок.

Use the AUX Socket

A. Use a 3.5mm to 3.5mm audio cable
(included) to connect the TV's or external
audio device headphone socket to the
AUX socket on the unit.
B. Use a RCA to 3.5mm audio cable (not
included) to connect the TV's audio
output sockets to the AUX socket on the
unit.

Connect Power

Risk of product damage!
-
the power supply voltage corresponds
to the voltage printed on the back or the
underside of the unit.
-
Before connecting the AC power cord,
ensure you have completed all other
connections.
Connect the mains cable to the AC~
Socket of soundbar and then into a mains socket.

Basic Operation

Standby/ON

When you first connect the soundbar to the mains socket, the main unit will be in Standby mode.
-
Press the
button on the soundbar or on the remote control to switch the unit ON.
-
Press the
button again to switch the unit back to STANDBY mode. The indicator will light up red.
-
Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
-
If a TV or an external device is connected, the unit will switch on automatically when the TV or the
external device is switched on.
-
When the has unit no input signal (or weak input signal) for over 15 minutes, it will automatically
switch to Standby mode.

Select Modes

Press the
button on the soundbar or press the AUX, BT, OPTICAL buttons on the remote control to
select the desired mode. The selected mode will be shown on the function LED'S on the front of the
soundbar.
RED: Power off
BLUE: Bluetooth
Ensure that
GREEN: AUX
WHITE: OPTICAL
- 8 -
AC~