Align Trex 700 Electric conversion Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Spielzeug Align Trex 700 Electric conversion herunter. Align Trex 700 Electric conversion 12 Seiten. Nitro electronic conversion kit
Auch für Align Trex 700 Electric conversion: Anleitungen zur Installation (6 seiten)
Seite druckenStep 3:
Be sure you have the front drilling guides secured well before drilling. Line the upper
bearing block holes with the holes in the drilling guide. Use the required drill bit to
drill through the guide holes as seen in the pictures. It's not necessary to use excessive
force when drilling the carbon side frames. Excessive force will dull the drill bit and may
damage the carbon frames. The original holes in the frames are approximately 4.6mm
so you will need to find a drill bit that size or close to it. You can use the drilling guides
supplied to index the right drill bit. We'll be using the stock shouldered screws supplied
with the Align Trex 700N kit for mounting the motor mount, upper bearing block,
battery mount and side frames to bottom plate connecting brackets.