Align-Pilates M8-Pro Reformer Montageanleitung & Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung & Benutzerhandbuch für Ellipsentrainer Align-Pilates M8-Pro Reformer herunter. Align-Pilates M8-Pro Reformer 12 Seiten.

Seite drucken
Introduction
Thank you for purchasing an M8-Pro reformer, which is crafted from solid North American maple, combining
classical styling with contemporary functionality. Designed for studio, rehab or private use, this innovative de-
sign offers a host of easy adjustments to provide complete flexibility in use. This manual will show you how
to assemble your M8-Pro reformer and then how to adjust it in use. Please ensure you read it fully before
unpacking and assembling the equipment.
Specification & Adjustability
•
104cm of smooth silent travel from the 8 PU wheel system
•
Extra wide carriage for greater comfort and to suit more users
•
4 spring bar positions with Patent pending Rapid Change spring bar for the fastest spring bar changes
•
Locking foot bar with 4 positions including completely flat
•
Quick and safe simultaneous rope adjustment system
•
Patented silent pulleys with silent design ropes & double loop handles
•
Silent foot strap with fluffy
•
150kg maximum user weight
Dimensions:
•
Reformer only: 249cm x 76cm (at maximum dimensions)
•
Weight: 80kg
Please note the Assembly Instructions and User Guide for the M8-Pro may be updated from time-to-time. For the
latest version of the manual, please visit: https://align-pilates.com/pilates-equipment-resources/assembly-user-guides/
Assembly
When using this manual if you are not sure which part the instructions are referring to please see the reformer map on
page 7.
Warning: the main box for the M8-Pro reformer weighs around 85kg so at least two strong people are required to
unpack the equipment and correct lifting technique should be used. At all times you are responsible for your own
safety and those around you.
Please unpack the equipment in a clear, clean & dry environment on a level floor surface.
Unpacking the main outer box:
a. Carefully cut the bag using scissors & with one person at each end lift the reformer out.
b. Remove the two accessory boxes and the bolt pack from the carriage box, see Fig.2, and move the large ship-
ping carton out of the way (we suggest you do not dispose of it until you are happy with the complete install) .
c. Open Box 1 which contains the foot bar components. Remove all outer packaging from the components and
discard the packaging.
2
Box 1
Bolt Pack
Fig.1
Box 2
Fig.2