AEG 944 187 934 Benutzerhandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Backofen AEG 944 187 934 herunter. AEG 944 187 934 48 Seiten.
Seite drucken
- 1. Table of Contents
- 2. Safety Information
- 3. Safety Instructions
- 4. Product Description
- 5. Control Panel
- 6. Before First Use
- 7. Daily Use
- 8. Clock Functions
- 9. Automatic Programmes
- 10. Using the Accessories
- 11. Additional Functions
- 12. Hints and Tips
- 13. Care and Cleaning
- 14. Troubleshooting
- 15. Energy Efficiency
Clock function
End Time
Time Delay
Set + Go
Minute Minder
00:00
Count Up Timer
7.2 How to set: Time of Day
After the first connection to the mains,
wait until the display shows
"12" flashes.
1. Press
or
2. Press
.
3. Press
or
4. Press
.
The display shows the new time.
To change the time of day press
again and again until
7.3 How to set: Duration
1. Set a heating function and
temperature.
2. Press
again and again until
starts to flash.
3. Press
or
for Duration.
4. Press
or the Duration starts
automatically after 5 seconds.
5. Press
or
Duration.
6. Press
or the Duration starts
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing
and time setting. The oven
turns off.
Application
To set when the oven turns off.
To combine Duration and End Time function.
To turn on the oven with necessary settings with only
one press of the sensor field any time later.
To set a countdown time. This function has no effect on
the operation of the oven. You can set the Minute Minder
at any time and also when the oven is off.
To set the count up, which shows how long the oven
works. It is on immediately when the oven starts to heat.
The Count Up Timer is not turned on if Duration and End
Time are set. This function has no effect on the opera‐
tion of the oven.
and 12:00.
to set the hours.
to set the minutes.
starts to flash.
to set the minutes
to set the hours for
7. Press a sensor field to stop the
signal.
8. Turn off the oven.
7.4 How to set: End Time
1. Set a heating function and
temperature.
2. Press
again and again until
starts to flash.
3. Press
or
and press
. First you set the
minutes and then the hours.
When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing
and the time setting . The
oven turns off automatically.
4. Press a sensor field to stop the
signal.
5. Turn off the oven.
7.5 How to set: Time Delay
1. Set a heating function and
temperature.
2. Press
again and again until
starts to flash.
3. Press
or
Duration.
4. Press
.
5. Press
or
Duration.
6. Press
.
ENGLISH
13
to set the End Time
to setthe minutes for
to set the hours for