Garmin NavComm SL30 Benutzerhandbuch - Seite 27

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Navigationssystem Garmin NavComm SL30 herunter. Garmin NavComm SL30 48 Seiten. Vhf transceiver
Auch für Garmin NavComm SL30: Kurzreferenz-Handbuch (2 seiten), Einrichtung (2 seiten)

Seite drucken

OBS Mode

OBS Operation

OBS mode enables the VOR CDI which is displayed on

the right side. The OBS course setting is shown in the

center of the display. The

mode. If OBS mode is allowed in the unit's installed

configuration, the annunciator over the

light. The knobs adjust the OBS setting in this mode

rather than the frequencies. The

course by tens (00-35 in higher digits). The

adjusts single degrees.

OBS Direct-To

You can navigate Direct-To a VOR. In Nav mode with a

VOR as the Active frequency, press

will now center in the TO condition.

OBS Mode Disabled

If the active frequency is a localizer, OBS mode is not

available. Instead, the CDI is always displayed with loc

appearing to its left.

OBS mode and the CDI display for VORs are not

available if the SL30 is installed with an indicator head

that uses a composite converter.

CDI

A CDI display is also available for VORs. The OBS course

setting is displayed to the left of the CDI. The CDI

graphic is dashed and marked "flagged" when no

signal is received. If you enabled the "Display Ident over

OBS" selection in System mode, the Morse code station

identifier will replace the OBS value when it receives the

identifier message.

111.80 s117.40

OBS

button is used to select this

OBS

LARGE

knob adjusts the

OBS

twice. The CDI

fr A}}}

120

120 ---flagged---

Advanced Operation

button will

SMALL

knob