Garmin echomap 40 series Handbuch für Piloten - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Piloten für GPS-System für die Schifffahrt Garmin echomap 40 series herunter. Garmin echomap 40 series 22 Seiten. Vhf comm
Auch für Garmin echomap 40 series: Installationsanleitung Handbuch (15 seiten), Benutzerhandbuch (32 seiten), Konformitätserklärung (1 seiten), Benutzerhandbuch (30 seiten), Benutzerhandbuch (50 seiten)

Detailed Operation

Getting Started

Volume, Power, and Squelch Control

119.80

Frequency selection with Large and Small knobs

119.80

s121.50

121.50

s119.80

Toggle Standby and Active frequencies with the

Flip/Flop button

This section introduces the basic operating details of the SL40 VHF Communications Transceiver.

Turn the Power/Volume control clockwise past the OFF detent. The SL40 may be installed to be

powered from the avionics panel so the on/off control will be disabled.

Turn the Power/Volume knob clockwise to increase the volume level and counterclockwise to

decrease volume.

Pull the Power/Volume knob out to disable automatic squelch.

Selecting Frequencies

New frequencies are ﬁrst selected as a Standby frequency and then toggled to the Active side when

desired. While viewing the frequency display, use the Large and Small knobs on the right side of the

SL40 to select the desired frequency.

1. Turn the Large, outer knob to change the values in 1 MHz increments. The MHz selection range is

between 118 and 136 in 1 MHz steps.

2. Turn the Small, inner knob to change the values in 25 kHz increments. The kHz selection range is

between 000 and 975 kHz in 25 kHz steps. Note that only two digits are displayed to the right of the

decimal point.

Turn the Large and Small knobs clockwise to increase and counterclockwise to decrease the fre-

quency values. Standby frequency selection is not inhibited during transmit.

Press the Flip/Flop button to toggle the Standby frequency to the Active frequency.

Detailed Operation