Garmin echomap 40 series Handbuch für Piloten - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch für Piloten für GPS-System für die Schifffahrt Garmin echomap 40 series herunter. Garmin echomap 40 series 22 Seiten. Vhf comm
Auch für Garmin echomap 40 series: Installationsanleitung Handbuch (15 seiten), Benutzerhandbuch (32 seiten), Konformitätserklärung (1 seiten), Benutzerhandbuch (30 seiten), Benutzerhandbuch (50 seiten)

Detailed Operation

Getting Started

Auto Stack, User, & Weather Frequencies

119.10 LST121.80

Viewing the Auto Stack List

119.10 MEM121.80

119.10 MEM124.55

Viewing User Stored Frequencies

119.10 WTH162.40

Viewing Weather Frequencies

162.400 MHz

162.425 MHz

162.450 MHz

162.475 MHz

162.500 MHz

162.525 MHz

162.550 MHz

Weather Frequencies (where available)

Auto Stack List (LST)

The SL40 keeps track of the last eight Active frequencies and stores them in a stack. Duplicate fre-

quencies are not stored.

1. Press RCL and then turn the Large, outer knob to display the Auto Stack List (LST).

2. Then, turn the Small, inner knob to view the stored frequencies. Frequencies are shown in the order of

use.

When you press the MEM button the Standby frequency is stored in User memory. The SL40

stores the last eight frequencies selected by the user. After eight User frequencies are stored, you will be

prompted that the stack is full (mem full). You may then remove or replace the frequency, or abort the

process. Duplicate frequencies are not stored.

1. Press RCL and then turn the Large, outer knob to reach the User frequencies.

2. Turn the Small, inner knob to view the User stored frequencies in numeric order.

The standard weather channels are stored in the memory of the SL40. You cannot transmit on a

weather channel frequency. Weather information service is not available in all countries. A small "x" to

the right of the Active frequency indicates that transmitting is not permitted.

1. Press RCL and then turn the Large, outer knob to display the weather (WTH) channel memory.

2. Then, turn the Small, inner knob to view the available weather channels.

You may abort the recall of a frequency so the current Standby frequency will remain in place.

1. Press RCL. While viewing one of the frequency types, press MEM. If you are viewing a REM, LST, or

WTH frequency type, the display will read "Abort RCL." If you are viewing a User (MEM) frequency type,

turn the Large knob to "Abort RCL."

2. Press MEM again to abort the recall and retain the current Standby frequency.