Garmin Forerunner 210 Installationsanleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für GPS-System für die Schifffahrt Garmin Forerunner 210 herunter. Garmin Forerunner 210 19 Seiten. Gps-enabled sports watch
Auch für Garmin Forerunner 210: Benutzerhandbuch (28 seiten), Schnellstart-Handbuch (13 seiten), Wichtige Sicherheitshinweise Handbuch (36 seiten), Anleitung Handbuch (25 seiten), Konformitätserklärung (6 seiten), Schnellstart-Handbuch (13 seiten), Benutzerhandbuch (18 seiten)

16 Starting in one corner of the mounting location, place a nut plate

lining up the large and small holes.

The raised portion of the nut plate should fit into the larger hole.

17 Secure the nut plates to the mounting surface by fastening the included M3 screws

3.6 mm (

in.) holes.

18 Install the foam gasket

The pieces of the foam gasket have adhesive on the back. Make sure you remove the protective liner before

installing them on the device.

19 If you will not have access to the back of the device after you mount it, connect all necessary cables to the

device before placing it into the cutout.

To prevent corrosion of the metal contacts, cover unused connectors with the attached weather caps.

20 Apply marine sealant between the mounting surface and the device to properly seal and prevent leakage

behind the dashboard.

21 If you will have access to the back of the device, apply marine sealant around the cutout.

22 Place the device into the cutout.

23 Secure the device to the mounting surface using the included M4 screws

24 Wipe away all excess marine sealant.

25 Install the trim caps by snapping them in place around the edges of the device.

Connection Considerations

After connecting the cables to the device, tighten the locking rings to secure each cable.

on the back of the device.

NOTICE

on the back of the mounting surface,

through the smaller