Garmin Forerunner 210 Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Morski system GPS Garmin Forerunner 210. Garmin Forerunner 210 19 stron. Gps-enabled sports watch
Również dla Garmin Forerunner 210: Instrukcja obsługi (28 strony), Skrócona instrukcja obsługi (13 strony), Ważne instrukcje dotyczące bezpieczeństwa (36 strony), Instrukcja obsługi (25 strony), Deklaracja zgodności (6 strony), Skrócona instrukcja obsługi (13 strony), Instrukcja obsługi (18 strony)

Drukuj stronę
Garmin Forerunner 210 Instrukcja instalacji
16 Starting in one corner of the mounting location, place a nut plate
lining up the large and small holes.
The raised portion of the nut plate should fit into the larger hole.
17 Secure the nut plates to the mounting surface by fastening the included M3 screws
9
3.6 mm (
/
 in.) holes.
64
18 Install the foam gasket
The pieces of the foam gasket have adhesive on the back. Make sure you remove the protective liner before
installing them on the device.
19 If you will not have access to the back of the device after you mount it, connect all necessary cables to the
device before placing it into the cutout.
To prevent corrosion of the metal contacts, cover unused connectors with the attached weather caps.
20 Apply marine sealant between the mounting surface and the device to properly seal and prevent leakage
behind the dashboard.
21 If you will have access to the back of the device, apply marine sealant around the cutout.
22 Place the device into the cutout.
23 Secure the device to the mounting surface using the included M4 screws
24 Wipe away all excess marine sealant.
25 Install the trim caps by snapping them in place around the edges of the device.

Connection Considerations

After connecting the cables to the device, tighten the locking rings to secure each cable.
on the back of the device.
NOTICE
on the back of the mounting surface,
through the smaller
.
5