Garmin GPSMAP 400 series Anleitung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für GPS-System für die Schifffahrt Garmin GPSMAP 400 series herunter. Garmin GPSMAP 400 series 6 Seiten. Non-waas; display interfaces
Auch für Garmin GPSMAP 400 series: Nachtrag zum Pilotenhandbuch (27 seiten), Kurzreferenz-Handbuch (2 seiten), Referenzhandbuch (2 seiten), Installationsanleitung Handbuch (28 seiten), Installationsanleitung Handbuch (30 seiten), Vorlage Handbuch (2 seiten), Vorlage (1 seiten), Konfigurationshandbuch (2 seiten), Handbuch für Piloten (28 seiten), Kurzreferenz-Handbuch (2 seiten)

To run the FDE Prediction Program:

1. With the 400/500 Series Trainer running, the simulated

in the upper left corner (Figure 2).

2. Select 'Fde Prediction Program'. The FDE Prediction Program window will appear (Figure 3), listing the ﬂ ight plan waypoints and the

current time as the departure time.

3. To change the departure date, click on the down arrow adjacent to the 'Date (UTC)' ﬁ eld. A calendar window appears. Click on the left

or right arrows to select a different month (if desired), then click on the desired date.

4. To change the departure time, click on the hours, minutes or seconds ﬁ elds adjacent to the 'Time (UTC)' ﬁ eld. Click on the up or down

arrows to change the displayed time.

5. To change the planned ground speed, route space or maximum allowed outage, click on the 'Setup button'. A setup window is

displayed (Figure 4). Click on the ﬁ eld for the desired item, then enter the desired value.

NOTE: Although the Flight Setup window refers to Oceanic Phase of Flight, the prediction will be correct even when Route Space

of 1 or 2 NM is selected for U.S. RNAV routes, SIDs, or STARs.

190-00643-00 REV. A

400/500 unit

on, and the desired ﬂ ight plan active, select the 'Options' menu

Figure 3. FDE Prediction Window

Figure 4. Flight Setup Window

Page 3