Garmin GPSMAP 400 series Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Морская система GPS Garmin GPSMAP 400 series. Garmin GPSMAP 400 series 6 страниц. Non-waas; display interfaces
Также для Garmin GPSMAP 400 series: Дополнение к руководству пилота (27 страниц), Краткое справочное руководство (2 страниц), Справочное руководство (2 страниц), Руководство по установке (28 страниц), Руководство по установке (30 страниц), Руководство по шаблонам (2 страниц), Шаблон (1 страниц), Руководство по конфигурации (2 страниц), Руководство пилота (28 страниц), Краткое справочное руководство (2 страниц)

To run the FDE Prediction Program:

1. With the 400/500 Series Trainer running, the simulated

in the upper left corner (Figure 2).

2. Select 'Fde Prediction Program'. The FDE Prediction Program window will appear (Figure 3), listing the ﬂ ight plan waypoints and the

current time as the departure time.

3. To change the departure date, click on the down arrow adjacent to the 'Date (UTC)' ﬁ eld. A calendar window appears. Click on the left

or right arrows to select a different month (if desired), then click on the desired date.

4. To change the departure time, click on the hours, minutes or seconds ﬁ elds adjacent to the 'Time (UTC)' ﬁ eld. Click on the up or down

arrows to change the displayed time.

5. To change the planned ground speed, route space or maximum allowed outage, click on the 'Setup button'. A setup window is

displayed (Figure 4). Click on the ﬁ eld for the desired item, then enter the desired value.

NOTE: Although the Flight Setup window refers to Oceanic Phase of Flight, the prediction will be correct even when Route Space

of 1 or 2 NM is selected for U.S. RNAV routes, SIDs, or STARs.

190-00643-00 REV. A

400/500 unit

on, and the desired ﬂ ight plan active, select the 'Options' menu

Figure 3. FDE Prediction Window

Figure 4. Flight Setup Window

Page 3