Garmin Mobile 20 Einrichten und loslegen Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Einrichten und loslegen Handbuch für Schiffsausrüstung Garmin Mobile 20 herunter. Garmin Mobile 20 20 Seiten. Garmin cell phone - mobile phone user manual
Auch für Garmin Mobile 20: Installationsanleitung Handbuch (12 seiten), Installationsanleitung Handbuch (15 seiten), Konformitätserklärung (1 seiten), Kurzreferenz-Handbuch (2 seiten), Konformitätserklärung (1 seiten), Spezifikationen (2 seiten), Benutzerhandbuch (29 seiten), (Finnisch) Benutzerhandbuch (20 seiten)

Mounting the GPS 20SM

Select a location for the GPS 20SM. To receive satellite

signals, place the GPS 20SM where it has a clear view

of the sky. To communicate, the GPS 20SM must be

within 10 meters (about 30 feet) of your mobile phone.

Clean and dry the selected area of the windshield.

Volume/hands-free

➊

Adapter cable connector

to power the phone

Power cable to power the GPS 20SM

Snap the phone mount onto the suction cup

mount.

Place the suction cup on the windshield.

Flip the lever back, toward the windshield.

Garmin Mobile™ 20 set up and go!

Windshield

➋

wheel

Lever

➌

Tab

To remove the phone mount from the suction cup

mount, turn the phone mount as far as you can to the

right or left. Apply pressure in that direction until the

phone mount pops off the suction cup mount.

To remove the suction cup mount, flip the lever toward

you. Pull the tab on the suction cup toward you.

NOte: If state or local laws prohibit the use of

suction cup mounts, or if your phone opens vertically

and the windshield has a steep angle, you may need

to use the dashboard disk.

Mounting on the Dashboard

Important: The permanent mounting adhesive is

extremely difficult to remove after it is installed.

Select a location on your dashboard where the

GPS 20SM will have a clear view of the sky.

Clean and dry the selected area of the dashboard.

Remove the backing from the bottom of the disk.

Place the disk on the dashboard.

Place the suction cup mount on top of the disk.

Flip the lever down (toward the disk).