Garmin Mobile 20 수동 설정 및 이동 - 페이지 5

{카테고리_이름} Garmin Mobile 20에 대한 수동 설정 및 이동을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Mobile 20 20 페이지. Garmin cell phone - mobile phone user manual
Garmin Mobile 20에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 설치 지침 매뉴얼 (15 페이지), 적합성 선언 (1 페이지), 빠른 참조 매뉴얼 (2 페이지), 적합성 선언 (1 페이지), 사양 (2 페이지), 소유자 매뉴얼 (29 페이지), (핀란드어) 사용자 설명서 (20 페이지)

Mounting the GPS 20SM

Select a location for the GPS 20SM. To receive satellite

signals, place the GPS 20SM where it has a clear view

of the sky. To communicate, the GPS 20SM must be

within 10 meters (about 30 feet) of your mobile phone.

Clean and dry the selected area of the windshield.

Volume/hands-free

➊

Adapter cable connector

to power the phone

Power cable to power the GPS 20SM

Snap the phone mount onto the suction cup

mount.

Place the suction cup on the windshield.

Flip the lever back, toward the windshield.

Garmin Mobile™ 20 set up and go!

Windshield

➋

wheel

Lever

➌

Tab

To remove the phone mount from the suction cup

mount, turn the phone mount as far as you can to the

right or left. Apply pressure in that direction until the

phone mount pops off the suction cup mount.

To remove the suction cup mount, flip the lever toward

you. Pull the tab on the suction cup toward you.

NOte: If state or local laws prohibit the use of

suction cup mounts, or if your phone opens vertically

and the windshield has a steep angle, you may need

to use the dashboard disk.

Mounting on the Dashboard

Important: The permanent mounting adhesive is

extremely difficult to remove after it is installed.

Select a location on your dashboard where the

GPS 20SM will have a clear view of the sky.

Clean and dry the selected area of the dashboard.

Remove the backing from the bottom of the disk.

Place the disk on the dashboard.

Place the suction cup mount on top of the disk.

Flip the lever down (toward the disk).