Garmin Mobile 20 수동 설정 및 이동 - 페이지 7

{카테고리_이름} Garmin Mobile 20에 대한 수동 설정 및 이동을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Mobile 20 20 페이지. Garmin cell phone - mobile phone user manual
Garmin Mobile 20에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 설치 지침 매뉴얼 (15 페이지), 적합성 선언 (1 페이지), 빠른 참조 매뉴얼 (2 페이지), 적합성 선언 (1 페이지), 사양 (2 페이지), 소유자 매뉴얼 (29 페이지), (핀란드어) 사용자 설명서 (20 페이지)

페이지 인쇄
Garmin Mobile 20 수동 설정 및 이동
GPS 20SM LED Status Indicators
The blue LED indicates the GPS Bluetooth connection.
The green LED indicates the hands-free connection.
Blue Bluetooth GPS LED Status
•
Blue flashing: making GPS Bluetooth connection
•
Blue steady on: GPS Bluetooth connection made
•
Blue and green steady on: GPS and hands-free
connection made (not supported by all phones)
Green Bluetooth Hands-free LED Status
•
Green steady on: hands-free connection made
•
Green rapid flashing: incoming call
Green flashing: call in progress
•
GPS 20SM Beep Meanings
•
High short beep: hands-free connection made
between GPS 20SM and phone
•
Low short double-beep: hands-free connection
ended between GPS 20SM and phone

Adjusting the Volume

Press the wheel on the right side of the phone mount
uP to raise volume or DOWN to lower. Press and
hold uP or DOWN to quickly adjust the volume.
Garmin Mobile™ 20 set up and go!
Using the Hands-free Wheel
Press the wheel on the right side of the phone mount
IN to perform hands-free operations:
Quickly Press to...
Not
connect to the
Connected
previously paired
phone
Connected use voice dial (if
supported by your
phone)
In a Call
hang up the call
Incoming
answer an incoming
Call
call
NOte: You may have to adjust the earpiece volume
on your phone to maximize the audio output of the
GPS 20SM. See your phone's documentation.
Press and Hold to...
dial the last number
dialed
transfer the call to your
phone so you can walk
away from the GPS
20SM while on a call
reject an incoming call
(On most phones and
plans, rejecting the call
sends it to your voice
mail.)