AEG FAVORIT 50660 User Information - Seite 19

Blättern Sie online oder laden Sie pdf User Information für Geschirrspüler AEG FAVORIT 50660 herunter. AEG FAVORIT 50660 44 Seiten. Aeg dishwasher

3. Press function button 4.

The 3 IN 1 indicator indicates the current setting:

3 IN 1

Indicator

3 IN 1

Indicator

4. Pressing function button 4 changes the setting.

5. If the 3 IN 1 indicator is indicating the desired setting, press the ON/

OFF button. The setting is now saved.

Before the start of the dishwashing cycle put 3in1 detergent in the de-

tergent dispenser.

As the rinse aid inflow is automatically switched off when the 3in1

function is activated, it may come about because of the different qual-

ity standards in the 3in1 detergent, that the dishes do not dry suffi-

ciently.

If this happens, proceed as follows (see section "Adding rinse aid"):

• Fill up the dispenser (if this is empty) with rinse aid.

• Set rinse aid dosage to "2" mechanically.

• Activate rinse aid inflow.

If you do not want to use 3in1 products any more

If you want to stop using 3in1 products, please do the following:

• Deactivate the 3in1 function.

• Fill up the dispensers for salt and rinse aid again.

• Switch the water softener to the highest setting and perform up to

three normal cycles without loading any dishes.

• Then set the water softener to the water hardness in your area.

is lit

3 in 1 function activated

3 in 1 function not activated

is not lit

(factory setting).