AEG FAVORIT 50660 Informações do utilizador - Página 19

Procurar online ou descarregar pdf Informações do utilizador para Máquina de lavar loiça AEG FAVORIT 50660. AEG FAVORIT 50660 44 páginas. Aeg dishwasher

Imprimir página

3. Press function button 4.

The 3 IN 1 indicator indicates the current setting:

3 IN 1

Indicator

3 IN 1

Indicator

4. Pressing function button 4 changes the setting.

5. If the 3 IN 1 indicator is indicating the desired setting, press the ON/

OFF button. The setting is now saved.

Before the start of the dishwashing cycle put 3in1 detergent in the de-

tergent dispenser.

As the rinse aid inflow is automatically switched off when the 3in1

function is activated, it may come about because of the different qual-

ity standards in the 3in1 detergent, that the dishes do not dry suffi-

ciently.

If this happens, proceed as follows (see section "Adding rinse aid"):

• Fill up the dispenser (if this is empty) with rinse aid.

• Set rinse aid dosage to "2" mechanically.

• Activate rinse aid inflow.

If you do not want to use 3in1 products any more

If you want to stop using 3in1 products, please do the following:

• Deactivate the 3in1 function.

• Fill up the dispensers for salt and rinse aid again.

• Switch the water softener to the highest setting and perform up to

three normal cycles without loading any dishes.

• Then set the water softener to the water hardness in your area.

is lit

3 in 1 function activated

3 in 1 function not activated

is not lit

(factory setting).