Brother GT-3 Series Wartungshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Wartungshandbuch für Drucker Brother GT-3 Series herunter. Brother GT-3 Series 16 Seiten. Cookbook maintenance
Auch für Brother GT-3 Series: Gebrauchsanweisung (15 seiten), Gebrauchsanweisung (12 seiten), Gebrauchsanweisung (18 seiten), Referenzhandbuch (8 seiten), Referenzhandbuch (8 seiten), Handbuch (3 seiten), Install (4 seiten), Wartungshandbuch (17 seiten)

HOW TO CLEAN THE PRINT HEAD NOZZLES ?

Go to the menu:

With Cleaning sticks and cleaning fluid...

> Clean the outside of the nozzle metal plate (Green aria = CLP)

TO BE DONE EVERY WEEK

With Clean Applicator sticks and cleaning fluid...

> Clean the surface of the small inner plate with nozzles, only in

one direction without pressure! Hold the stick by his end!

HOW TO CLEAN THE ENCODER STRIP?

Maintenance

4 or 3

ALCOHOL 95°

Maintenance

Nozzle Cleaning

CR Encoder Strip Cleaning

Loosen the four (or three, depending of model) black

thumb screws (do not remove them completely) of the

encoder cover, and remove the cover.

Slide the carriage to the right side of the machine.

Take the encoder cleaning tool, and apply isopropyl

alcohol (95% or higher) to the felt portion.

Gently slide the tool across the encoder strip, remem-

bering to move the carriage to get the other side of the

strip.

Once done 2 or 3 times, remove the encoder tool being

very careful not to damage the strip.

Attach the cover back and tighten the 3 or 4 thumb

screws.

Turn the machine on.

follow instructions and turn off printer

After cleaning the Encoder Strip, perform a

CR Speed Adjustment on the machine !

CLP

NOZZLE PLATE