- ページ 10

プリンター Brother GT-3 SeriesのPDF メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Brother GT-3 Series 16 ページ。 Cookbook maintenance
Brother GT-3 Series にも：取扱説明書 (15 ページ), 取扱説明書 (12 ページ), 取扱説明書 (18 ページ), リファレンス・マニュアル (8 ページ), リファレンス・マニュアル (8 ページ), マニュアル (3 ページ), インストール (4 ページ), メンテナンス・マニュアル (17 ページ)

HOW TO CLEAN THE PRINT HEAD NOZZLES ?

Go to the menu:

With Cleaning sticks and cleaning fluid...

> Clean the outside of the nozzle metal plate (Green aria = CLP)

TO BE DONE EVERY WEEK

With Clean Applicator sticks and cleaning fluid...

> Clean the surface of the small inner plate with nozzles, only in

one direction without pressure! Hold the stick by his end!

HOW TO CLEAN THE ENCODER STRIP?

Maintenance

4 or 3

ALCOHOL 95°

Maintenance

Nozzle Cleaning

CR Encoder Strip Cleaning

Loosen the four (or three, depending of model) black

thumb screws (do not remove them completely) of the

encoder cover, and remove the cover.

Slide the carriage to the right side of the machine.

Take the encoder cleaning tool, and apply isopropyl

alcohol (95% or higher) to the felt portion.

Gently slide the tool across the encoder strip, remem-

bering to move the carriage to get the other side of the

strip.

Once done 2 or 3 times, remove the encoder tool being

very careful not to damage the strip.

Attach the cover back and tighten the 3 or 4 thumb

screws.

Turn the machine on.

follow instructions and turn off printer

After cleaning the Encoder Strip, perform a

CR Speed Adjustment on the machine !

CLP

NOZZLE PLATE