Brother TJ-4420TN Setup-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Drucker Brother TJ-4420TN herunter. Brother TJ-4420TN 4 Seiten. Label peeler module

8. Fasten the remaining two Screws on the module's Front Cover as illustrated

(fastened by 0.74 N • m ± 0.10 N • m).

NOTE

To open the module's Front Cover, press the button on the side, as

illustrated.

Next, go to section B to install the Internal Liner Rewinder Module.

B. Install the Internal Liner Rewinder Module

1. Remove the four Screws as illustrated, and then remove the Rewind Spindle

Cover.

2. Thread the Power Cable from the PCB side and connect it to the Internal Liner

Rewind Module's power connector.

3. Use the four Screws supplied with the Internal Liner Rewinder Module to

secure it. (fastened by 1.03 N • m ± 0.15 N • m)

Next, go to section C to install the Media Guide Bar and Rear Label Guide

Module.