Brother PT-2040SC Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Etikettenhersteller Brother PT-2040SC herunter. Brother PT-2040SC 17 Seiten.

Seite drucken

GETTING STARTED

Installing Power Supply

Battery Compartment

Cover

When using AC Adapter

(AD-24ESA-01/

AD-24ESAW-01):

1. Insert the Power

Adapter cord into the AC

Adapter Jack on the side

of the machine.

2. Insert the Power

Adapter into a standard

AC electrical outlet.

When using batteries:

1. Make sure the power is

off.

2. With the LCD facing

down, remove the Battery

Compartment Cover by

pressing the grooved tab

and pushing in the

direction of the arrow, as

illustrated.

3. This label maker

requires six (6) AA

alkaline batteries, not

included.

Make sure that the

positive (+) and negative

(-) ends of the batteries

match the marks inside

the battery compartment.

Note:

Always replace all six

batteries at the same time

using brand new ones.

4. Attach the Battery

Compartment Cover by

inserting the three hooks

at the bottom into the

slots on the machine, then

press down firmly until it

clicks into place.

When running a memory

backup, we recommend

using both the Power

Adapter AND batteries, in

the event that one or the

other power method fails.

Installing a Tape Cassette

Tape

Exit Slot

Release

Lever

1. Open the Cassette

Cover by lifting both sides

at the same time.

2. Insert the Tape Cassette

following the drawing

marked inside the case.

Gently press the Tape

Cassette into the label

maker until it clicks into

place.

• Use only tape widths of

0.13" (3.5 mm), 0.23"

(6 mm), 0.35" (9 mm),

0.47" (12 mm) or 0.70"

(18 mm).

• If your TZe tape is

packaged with protective

plastic, be sure to remove

the plastic before inserting

the Tape Cassette.

• Use Brother TZe tapes

with this machine.

3. Close the Cassette

Cover and gently press

until it clicks into place.