AEG L 98699 FL Benutzerhandbuch - Seite 22
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Waschmaschine AEG L 98699 FL herunter. AEG L 98699 FL 44 Seiten. Aeg washer user manual
Auch für AEG L 98699 FL: Benutzerhandbuch (40 seiten), Benutzerhandbuch (40 seiten), Benutzerhandbuch (32 seiten)
Seite drucken
22
SET THE DELAY START
1. Touch button
to set the desired delayed start.
The display shows the expected
end of the programme
2. Touch button
starts the countdown of the delay
start.
When the countdown is comple-
ted, the programme starts auto-
matically.
STARTING A PROGRAMME
1. Touch button
gramme. The indicator of button
stops to flash and is on with red
6
colour.
If a delayed start is set, the appliance
starts the countdown.
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
INTERRUPT A PROGRAMME
1. Touch button
flashes.
2. Touch button
ing programme continues.
CANCEL A PROGRAMME
1. Press button
gramme and to deactivate the ap-
pliance.
2. Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
7
again and again
, the appliance
6
6
to start the pro-
6
. The indicator
6
again. The wash-
1
to cancel the pro-
again to activate
1
Before you touch button
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.
CHANGE A FUNCTION
You can change only some functions
before they operate.
1. Touch button
flashes.
2. Change the function set.
3. Touch button
ing programme continues.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Touch button
symbol in the display goes off and
a message tells you that the door is
unlocked.
2. Open the appliance door.
3. Close the appliance door and
touch button
6
gramme or the delay start contin-
ues.
If the temperature and the level
of the water is too high, the
door lock symbol stays on. You
cannot open the door. If neces-
sary, do the following procedure
to open the door:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is
in the drum.
6
to
. The indicator
6
again. The wash-
6
6
. The door lock
again. The pro-