AEG L 98699 FL 사용자 설명서 - 페이지 22

{카테고리_이름} AEG L 98699 FL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 98699 FL 44 페이지. Aeg washer user manual
AEG L 98699 FL에 대해서도 마찬가지입니다: 사용자 설명서 (40 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (32 페이지)

페이지 인쇄

1. Troubleshooting

SET THE DELAY START

1. Touch button

to set the desired delayed start.

The display shows the expected

end of the programme

2. Touch button

starts the countdown of the delay

start.

When the countdown is comple-

ted, the programme starts auto-

matically.

STARTING A PROGRAMME

1. Touch button

gramme. The indicator of button

stops to flash and is on with red

colour.

If a delayed start is set, the appliance

starts the countdown.

The appliance adjust automat-

ically the cycle time to the

laundry you have put in the

drum to have perfect washing

results in the minimum neces-

sary time. After approximately

15 minutes from the start of

the programme, the display

shows the new time value.

INTERRUPT A PROGRAMME

1. Touch button

flashes.

2. Touch button

ing programme continues.

CANCEL A PROGRAMME

1. Press button

gramme and to deactivate the ap-

pliance.

2. Press button

the appliance. Now, you can set a

new washing programme.

The appliance does not drain

the water.

again and again

, the appliance

to start the pro-

. The indicator

again. The wash-

to cancel the pro-

again to activate

Before you touch button

start the appliance, you can can-

cel or change the set of the de-

lay start.

You cannot set the delay start

with the Steam programme.

CHANGE A FUNCTION

You can change only some functions

before they operate.

1. Touch button

flashes.

2. Change the function set.

3. Touch button

ing programme continues.

OPEN THE DOOR

While a programme or the delay start

operates, the appliance door is locked.

To open the appliance door:

1. Touch button

symbol in the display goes off and

a message tells you that the door is

unlocked.

2. Open the appliance door.

3. Close the appliance door and

touch button

gramme or the delay start contin-

ues.

If the temperature and the level

of the water is too high, the

door lock symbol stays on. You

cannot open the door. If neces-

sary, do the following procedure

to open the door:

1. Deactivate the appliance.

2. Wait for some minutes.

3. Make sure that no water is

in the drum.

. The indicator

again. The wash-

. The door lock

again. The pro-