Fujitsu BX630 - PRIMERGY - S2 Dual Handbuch für Service-Ergänzungen - Seite 27

Blättern Sie online oder laden Sie pdf Handbuch für Service-Ergänzungen für Server Fujitsu BX630 - PRIMERGY - S2 Dual herunter. Fujitsu BX630 - PRIMERGY - S2 Dual 49 Seiten. Scalable server-blade
Auch für Fujitsu BX630 - PRIMERGY - S2 Dual: Handbuch für Service-Ergänzungen (47 seiten)

Seite drucken
Replacement Routines
4.3

Installing processors

You can install one or two AMD Opteron MP processors in the basic module of
the server blade, see
V
ATTENTION!
Always use processors of the same type. All processors must have
the same frequency and cache size. For multi-processor mode use a
suitable multi-processor operating system.
Never touch the processor core.
The thermal paste must be intact for mounting the processor.
Never install a processor without a heat sink! The processor is likely
to overheat, which may cause damage to the processor and the
system board.
Requirements
– The server blade has been removed
– The cover of the server blade has been removed
Removing the dummy heat sink
2
Figure 16: Removing the dummy heat sink
"Spare Parts and Add-On Modules" on page
1
Rev. 2.0
Installing processors
Ê Undo the four screws
2
which fasten the
dummy heat sink and
remove it.
36.
27