Fujitsu BX630 - PRIMERGY - S2 Dual Manuel de supplément de service - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel de supplément de service pour {nom_de_la_catégorie} Fujitsu BX630 - PRIMERGY - S2 Dual. Fujitsu BX630 - PRIMERGY - S2 Dual 49 pages. Scalable server-blade
Également pour Fujitsu BX630 - PRIMERGY - S2 Dual : Manuel de supplément de service (47 pages)

Imprimer la page
Replacement Routines
4.3

Installing processors

You can install one or two AMD Opteron MP processors in the basic module of
the server blade, see
V
ATTENTION!
Always use processors of the same type. All processors must have
the same frequency and cache size. For multi-processor mode use a
suitable multi-processor operating system.
Never touch the processor core.
The thermal paste must be intact for mounting the processor.
Never install a processor without a heat sink! The processor is likely
to overheat, which may cause damage to the processor and the
system board.
Requirements
– The server blade has been removed
– The cover of the server blade has been removed
Removing the dummy heat sink
2
Figure 16: Removing the dummy heat sink
"Spare Parts and Add-On Modules" on page
1
Rev. 2.0
Installing processors
Ê Undo the four screws
2
which fasten the
dummy heat sink and
remove it.
36.
27