Fujitsu BX630 - PRIMERGY - S2 Dual Manuel de supplément de service - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel de supplément de service pour {nom_de_la_catégorie} Fujitsu BX630 - PRIMERGY - S2 Dual. Fujitsu BX630 - PRIMERGY - S2 Dual 49 pages. Scalable server-blade
Également pour Fujitsu BX630 - PRIMERGY - S2 Dual : Manuel de supplément de service (47 pages)

Imprimer la page
Replacement Routines
2
Figure 19: Installing the processor
Installing the heat sink
V
CAUTION!
Before mounting the heat sink, check that the heat sink compound is
intact. If it is not, you must do the following before reinstalling the heat
sink:
Ê Remove any remnants of the heat sink compound from the bottom of
the heat sink and clean the top of the processor. Use a lint-free
Isopropyl alcohol wipe (e.g. CleanTex TexPad 801, available from
specialist dealers).
Ê Apply a new film of heat sink compound to the bottom of the heat sink.
2
1
Rev. 2.0
Installing processors
Ê Place the processor on
the socket and make
sure the coding on the
processor (circle)
points to the corre-
sponding mark on the
socket.
Ê Swivel the locking
lever of the processor
socket down (arrow).
29