Fujitsu PRIMEPOWER 800 Hardware-Plattform-Handbuch - Seite 30
Blättern Sie online oder laden Sie pdf Hardware-Plattform-Handbuch für Server Fujitsu PRIMEPOWER 800 herunter. Fujitsu PRIMEPOWER 800 50 Seiten. Operation for solaris 10 operating system
Seite drucken
ok
4.
Search the device path to the secondary LAN port with a show-nets command from ok prompt of a
client system.
ok show-nets <Return>
Example
ok show-nets
5.
From ok prompt of a client system, please start a client system using the secondary LAN port.
ok boot /pci@83,2000/FJSV,pwga@1 <Return>
6.
Install the Solaris
4.3.2.6
Configuring VLAN interface
4.3.2.6.1
IEEE 802.1Q TagVLAN
The outline about a VLAN interface and directions required in order to setup VLAN interface are explained.
About IEEE802.1Q TagVLAN
By using VLAN, traffic management of two or more networks by a single physical interface becomes
possible. In order to create a VLAN environment, which resembles Figure 4.1 Example of VLAN
environment, a VLAN setup (VLAN ID and Tagged/Untagged) of a switch is required.
24
a) /pci@83,2000/FJSV,pwga@1
b) /pci@1f,4000/FJSV,pgsb@4
q) NO SELECTION
Enter Selection, q to quit: