Fujitsu PRIMEPOWER 800 Panduan Platform Perangkat Keras - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Platform Perangkat Keras untuk Server Fujitsu PRIMEPOWER 800. Fujitsu PRIMEPOWER 800 50 halaman. Operation for solaris 10 operating system
Halaman Cetak
ok
4.
Search the device path to the secondary LAN port with a show-nets command from ok prompt of a
client system.
ok show-nets <Return>
Example
ok show-nets
5.
From ok prompt of a client system, please start a client system using the secondary LAN port.
ok boot /pci@83,2000/FJSV,pwga@1 <Return>
6.
Install the Solaris
4.3.2.6
Configuring VLAN interface
4.3.2.6.1
IEEE 802.1Q TagVLAN
The outline about a VLAN interface and directions required in order to setup VLAN interface are explained.
About IEEE802.1Q TagVLAN
By using VLAN, traffic management of two or more networks by a single physical interface becomes
possible. In order to create a VLAN environment, which resembles Figure 4.1 Example of VLAN
environment, a VLAN setup (VLAN ID and Tagged/Untagged) of a switch is required.
24
a) /pci@83,2000/FJSV,pwga@1
b) /pci@1f,4000/FJSV,pgsb@4
q) NO SELECTION
Enter Selection, q to quit: