Fujitsu PRIMERGY Econel 200 S2 Handbuch für Service-Ergänzungen - Seite 19
Blättern Sie online oder laden Sie pdf Handbuch für Service-Ergänzungen für Server Fujitsu PRIMERGY Econel 200 S2 herunter. Fujitsu PRIMERGY Econel 200 S2 39 Seiten.
Seite drucken
Replacement routines
Ê Disconnect the plug of the processor fan cable from the system board
(connector Fan1 CPU, see system board foil D2530).
Ê Pull the lock bar in direction of the front side.
Ê Pull the system fan a little forward to disengage its hooks at the rear side of
the server and take out the processor fan 1.
4.1.6
Removing the front cover
Ê Remove the side cover as described in section "Opening the server" on
page 17.
Figure 2: Opening the front cover
Ê Detach the three locking levers and open the front cover.
Econel 200 S2
Service Supplement
Preparation
19