Fujitsu PRIMERGY Econel 200 S2 Servis Ek Kılavuzu - Sayfa 19

Sunucu Fujitsu PRIMERGY Econel 200 S2 için çevrimiçi göz atın veya pdf Servis Ek Kılavuzu indirin. Fujitsu PRIMERGY Econel 200 S2 39 sayfaları.

Replacement routines

Ê Disconnect the plug of the processor fan cable from the system board

(connector Fan1 CPU, see system board foil D2530).

Ê Pull the lock bar in direction of the front side.

Ê Pull the system fan a little forward to disengage its hooks at the rear side of

the server and take out the processor fan 1.

4.1.6

Removing the front cover

Ê Remove the side cover as described in section "Opening the server" on

page 17.

Figure 2: Opening the front cover

Ê Detach the three locking levers and open the front cover.

Econel 200 S2

Service Supplement

Preparation