Fujitsu PRIMERGY TX120 S2 Handbuch für Service-Ergänzungen - Seite 29
Blättern Sie online oder laden Sie pdf Handbuch für Service-Ergänzungen für Server Fujitsu PRIMERGY TX120 S2 herunter. Fujitsu PRIMERGY TX120 S2 38 Seiten.
Seite druckenReplacement routines
Figure 13: Removing the heat sink of the processor
Ê Loosen the heat sink by unlocking the four screws
Ê Remove the residual thermal paste from the underside of the heat sink.
Ê Clean the underside of the heat sink using a lint-free cloth.
Ê Using a screwdriver, turn the locking mechanism counter-clockwise as far as
it will go
(figure 14 on page
Ê Lift the installed processor carefully out of the socket.
Ê Remove the protective cap from the new processor.
Ê Position the new processor over the socket and insert it carefully into the
socket.
V
CAUTION!
The processor can only be installed in one particular direction. Pay
attention to the location mark on one of the corners and the recesses
at the sides. Do not use force to press it into the socket to avoid
damaging the pins or the processor.
TX120 S2
30).
Service Supplement
Replacing the processor
(figure 13 on page
29).
29