Fujitsu PRIMERGY TX120 S2 Service Supplement Manual - Page 29

Browse online or download pdf Service Supplement Manual for Server Fujitsu PRIMERGY TX120 S2. Fujitsu PRIMERGY TX120 S2 38 pages.

Print Page

Replacement routines

Figure 13: Removing the heat sink of the processor

Ê Loosen the heat sink by unlocking the four screws

Ê Remove the residual thermal paste from the underside of the heat sink.

Ê Clean the underside of the heat sink using a lint-free cloth.

Ê Using a screwdriver, turn the locking mechanism counter-clockwise as far as

it will go

(figure 14 on page

Ê Lift the installed processor carefully out of the socket.

Ê Remove the protective cap from the new processor.

Ê Position the new processor over the socket and insert it carefully into the

socket.

CAUTION!

The processor can only be installed in one particular direction. Pay

attention to the location mark on one of the corners and the recesses

at the sides. Do not use force to press it into the socket to avoid

damaging the pins or the processor.

TX120 S2

30).

Service Supplement

Replacing the processor

(figure 13 on page

29).