Fujitsu PRIMERGY TX150 S6 Handbuch für Service-Ergänzungen - Seite 17
Blättern Sie online oder laden Sie pdf Handbuch für Service-Ergänzungen für Server Fujitsu PRIMERGY TX150 S6 herunter. Fujitsu PRIMERGY TX150 S6 45 Seiten.
Auch für Fujitsu PRIMERGY TX150 S6: Hinweise zur Verwendung (8 seiten)
Seite drucken
4
Replacement routines
V
CAUTION!
Observe the safety instructions in the
et seq. .
4.1
Preparation
4.1.1
Floorstand model
I
You will find a detailed description of "Opening the server" and
"Removing the front cover" in the Options Guide TX150 S6.
4.1.1.1
Opening the server
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the on/off
switch for at least four seconds ("Power override" function).
Ê Pull all power connectors out of the power outlets.
Ê If required, remove the lock on the side cover.
Ê Unlock the server.
Ê Loosen the two knurled screws at the server's rear side.
Ê Push back the left-hand side cover approxiate 2 cm.
Ê Remove the left-hand side cover.
4.1.1.2
Removing the front cover
Remove the front cover when making the following replacements:
– Replacing the operating panel
– Replacing the DVD/DVD-RW drive
– Replacing the intrusion switches
Ê Push the drive cover up as far as possible.
Ê Remove the hard disk cover.
TX150 S6
chapter "Safety notes" on page 11
Service Supplement
17