Fujitsu PRIMERGY TX150 S6 Manuel de supplément de service - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de supplément de service pour {nom_de_la_catégorie} Fujitsu PRIMERGY TX150 S6. Fujitsu PRIMERGY TX150 S6 45 pages.
Également pour Fujitsu PRIMERGY TX150 S6 : Notes sur l'utilisation (8 pages)
Imprimer la page
4
Replacement routines
V
CAUTION!
Observe the safety instructions in the
et seq. .
4.1
Preparation
4.1.1
Floorstand model
I
You will find a detailed description of "Opening the server" and
"Removing the front cover" in the Options Guide TX150 S6.
4.1.1.1
Opening the server
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the on/off
switch for at least four seconds ("Power override" function).
Ê Pull all power connectors out of the power outlets.
Ê If required, remove the lock on the side cover.
Ê Unlock the server.
Ê Loosen the two knurled screws at the server's rear side.
Ê Push back the left-hand side cover approxiate 2 cm.
Ê Remove the left-hand side cover.
4.1.1.2
Removing the front cover
Remove the front cover when making the following replacements:
– Replacing the operating panel
– Replacing the DVD/DVD-RW drive
– Replacing the intrusion switches
Ê Push the drive cover up as far as possible.
Ê Remove the hard disk cover.
TX150 S6
chapter "Safety notes" on page 11
Service Supplement
17