Fujitsu SPARC Enterprise M3000 Produkthinweise - Seite 20

Blättern Sie online oder laden Sie pdf Produkthinweise für Server Fujitsu SPARC Enterprise M3000 herunter. Fujitsu SPARC Enterprise M3000 42 Seiten.
Auch für Fujitsu SPARC Enterprise M3000: Handbuch "Erste Schritte (8 seiten), Produkthinweise (38 seiten), Handbuch für Sicherheit und Compliance (34 seiten)

Fujitsu SPARC Enterprise M3000 Produkthinweise

CD-RW/DVD-RW Drive Unit

Two types of CD-RW/DVD-RW drive units are supported, slot-in type (
and tray type (
FIGURE 1-11
FIGURE 1-12
Note – The locations of LED and button may vary depending on the servers.
Note – When you use the medium on the tray type CD-RW/DVD-RW drive unit,
make sure that the center of the medium is secured to the clamp of the tray, and
then push the tray into the drive.

Notes on the Use of USB Memory

To execute the dumpconfig(8), restoreconfig(8) or snapshot(8) command, if
you specify USB memory as the destination to store data, prepare the USB memory
as a medium in advance.
The data stored will include the information about the system. To use USB memory,
you need to pay attention to the management of the USB memory in which the data
stored, from the data security viewpoint.
We do not provide guarantees to every USB memory from any manufacturers that
currently on the market against its connectivity to XSCF and proper operation.
Depending on the USB memory in use, defects such as the XSCF firmware error or
reset may occur. In case such defects occurred, stop the use of USB memory
immediately.
10
SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010
).
FIGURE 1-12
Slot-in Type
Tray Type
)
FIGURE 1-11