Fujitsu SPARC Enterprise M3000 Примітки до продукту - Сторінка 20

Переглянути онлайн або завантажити pdf Примітки до продукту для Сервер Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 42 сторінки.
Також для Fujitsu SPARC Enterprise M3000: Посібник для початківців (8 сторінок), Примітки до продукту (38 сторінок), Посібник з безпеки та комплаєнсу (34 сторінок)

CD-RW/DVD-RW Drive Unit

Two types of CD-RW/DVD-RW drive units are supported, slot-in type (

and tray type (

FIGURE 1-11

FIGURE 1-12

Note – The locations of LED and button may vary depending on the servers.

Note – When you use the medium on the tray type CD-RW/DVD-RW drive unit,

make sure that the center of the medium is secured to the clamp of the tray, and

then push the tray into the drive.

To execute the dumpconfig(8), restoreconfig(8) or snapshot(8) command, if

you specify USB memory as the destination to store data, prepare the USB memory

as a medium in advance.

The data stored will include the information about the system. To use USB memory,

you need to pay attention to the management of the USB memory in which the data

stored, from the data security viewpoint.

We do not provide guarantees to every USB memory from any manufacturers that

currently on the market against its connectivity to XSCF and proper operation.

Depending on the USB memory in use, defects such as the XSCF firmware error or

reset may occur. In case such defects occurred, stop the use of USB memory

immediately.

SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010

FIGURE 1-12

Slot-in Type

Tray Type

)

FIGURE 1-11