Fujitsu SPARC Enterprise M3000 Produkthinweise - Seite 32
Blättern Sie online oder laden Sie pdf Produkthinweise für Server Fujitsu SPARC Enterprise M3000 herunter. Fujitsu SPARC Enterprise M3000 42 Seiten.
Auch für Fujitsu SPARC Enterprise M3000: Handbuch "Erste Schritte (8 seiten), Produkthinweise (38 seiten), Handbuch für Sicherheit und Compliance (34 seiten)
Seite drucken
XCP Issues Fixed in Releases Earlier Than XCP
TABLE 6
ID
Description
RTIF1-
In a domain mounted with the 10 Gigabit
090508-001
Ethernet card (SE0X7HE1F), when you set the
OpenBoot PROM environmental variable
diag-switch? to true, the following
warning message appears on the console; and
at the same time, "Msg: Device error
(FCode informed error)" is recorded in
the error log.
WARNING: /pci@7,700000: FCODE map-
in doesn't match decoded register
type;
And when you execute the showstatus(8)
command, "Degraded" might be indicated to
the FRU which has installed the relevant card.
RTIF1-
When you use the sethttps(8) command to
090729-001
create a self-signed web server certificate, if
the number of characters specified in a
parameter exceeds 100, it might result in an
internal error and you might fail to create the
certificate.
RTIF1-
The XSCF might go down and require a
090824-001
reboot, or you might see console error
messages and a core dump
(ereport.chassis.software.core) when
one of these conditions occurs:
• A local account has been created with a user
ID explicitly assigned to a value larger than
65536 (adduser -u uid).
• An LDAP account has been used that has a
UID value larger than 65536.
RTIF1-
While Active Directory is enabled, if you log in
091021-001
to XSCF using the user name that registered in
the Active Directory server, the
showconsolepath(8) command displays not
the log-in user name but "proxyuser."
RTIF1-
The loadcert console operand is missing in
091105-001
the usage of the setad(8) command and the
setldapssl(8) command.
RTIF1-
Once domain detected a failure related to
091109-001
DIMM or PCI, the error log about this detected
failure is registered every time you reset XSCF.
22
SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010
1093
(Continued)
Workaround
The entire output can be safely ignored.
To avoid these outputs, execute the following
command at the ok prompt and set the
OpenBoot PROM environmental variable
diag-switch? to false.
setenv diag-switch? false
Specify up to 100 characters in the parameter
and execute the sethttps(8) command again.
Use only user accounts with a user ID (UID)
value between 100 and 60000. This is the range
of auto-assigned UIDs for the XSCF command
adduser(8).
No workaround is available.
For how to use the loadcert console
operand of the setad(8) command and the
setldapssl(8) command, see the man page.
This error log can be safely ignored.