Fujitsu SPARC Enterprise T5120 Handbuch "Erste Schritte

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Server Fujitsu SPARC Enterprise T5120 herunter. Fujitsu SPARC Enterprise T5120 12 Seiten. Sparc enterprise
Auch für Fujitsu SPARC Enterprise T5120: Übersicht Handbuch (34 seiten), Handbuch "Erste Schritte (12 seiten), Handbuch zur Standortplanung (26 seiten), Handbuch für Sicherheit und Compliance (34 seiten)

SPARC

Enterprise T5120 Server Getting Started Guide

(For Models That Run on DC Input Power)

This guide describes the minimum steps you must perform to power on and boot your server for the first time

using the preinstalled Solaris™ Operating System (Solaris OS).

Servers that use DC input power require you to build and connect the power cords to specific safety

specifications. The specifications are described in the SPARC Enterprise T5120 and T5220 Servers Installation Guide

that is available from http://www.fujitsu.com/sparcenterprise/manual/.

SPARC Enterprise T5120 Server

FIGURE 1

Before You Begin

For quick installation and configuration, follow these steps. For more detailed information, refer to the complete

online product documentation set at: http://www.fujitsu.com/sparcenterprise/manual/

Understand the following information before you set up the server for the first time:

Do not apply power until instructed to do so – This system includes a service processor (SP) that is used to

■

configure and boot the host server. To properly configure the host server and view SP messages, do not apply

power to the server until the SP and host networking connections are made, as described in this guide.

Shipping Contents

Quant

ity

Item

Server

RJ-45 Ethernet cable

RJ-45 to DB-25 adapter (crossover)

RJ-45 to DB-9 adapter (crossover)

Wrist strap

DC power connectors

Rackmounting kit with cable

management assembly