Fujitsu SPARC Enterprise T5120 시작하기 매뉴얼

{카테고리_이름} Fujitsu SPARC Enterprise T5120에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SPARC Enterprise T5120 12 페이지. Sparc enterprise
Fujitsu SPARC Enterprise T5120에 대해서도 마찬가지입니다: 개요 매뉴얼 (34 페이지), 시작하기 매뉴얼 (12 페이지), 사이트 계획 매뉴얼 (26 페이지), 안전 및 규정 준수 매뉴얼 (34 페이지)

페이지 인쇄
Fujitsu SPARC Enterprise T5120 시작하기 매뉴얼
SPARC
Enterprise T5120 Server Getting Started Guide
®
(For Models That Run on DC Input Power)
This guide describes the minimum steps you must perform to power on and boot your server for the first time
using the preinstalled Solaris™ Operating System (Solaris OS).
Servers that use DC input power require you to build and connect the power cords to specific safety
specifications. The specifications are described in the SPARC Enterprise T5120 and T5220 Servers Installation Guide
that is available from http://www.fujitsu.com/sparcenterprise/manual/.
SPARC Enterprise T5120 Server
FIGURE 1

Before You Begin

For quick installation and configuration, follow these steps. For more detailed information, refer to the complete
online product documentation set at: http://www.fujitsu.com/sparcenterprise/manual/
Understand the following information before you set up the server for the first time:
Do not apply power until instructed to do so – This system includes a service processor (SP) that is used to
■
configure and boot the host server. To properly configure the host server and view SP messages, do not apply
power to the server until the SP and host networking connections are made, as described in this guide.
Shipping Contents
Quant
ity
Item
1
Server
2
RJ-45 Ethernet cable
1
RJ-45 to DB-25 adapter (crossover)
1
RJ-45 to DB-9 adapter (crossover)
1
Wrist strap
2
DC power connectors
1
Rackmounting kit with cable
management assembly