Fujitsu FI-5900C Erste Schritte - Seite 27

Blättern Sie online oder laden Sie pdf Erste Schritte für Scanner Fujitsu FI-5900C herunter. Fujitsu FI-5900C 30 Seiten. Consumable replacement and cleaning instructions
Auch für Fujitsu FI-5900C: Handbuch für Installationsverfahren (7 seiten), Handbuch für Installationsverfahren (9 seiten), Installationsverfahren (3 seiten), Broschüre & Specs (2 seiten), Ergänzendes Handbuch (4 seiten), Erste Schritte (30 seiten), Broschüre & Specs (4 seiten), Anweisungen zum Austausch von Verbrauchsmaterialien und zur Reinigung (24 seiten), Ersetzungsverfahren (22 seiten), Anweisungen zur Reinigung (2 seiten)

Fujitsu FI-5900C Erste Schritte
Appendix 2
During its operation, the inside
ARNI N G
glass of the ADF becomes very hot.
Before you clean inside the scan-
ner, turn off its power and unplug
the AC adapter from the outlet. Wait
for at least 15 minutes.
Do not turn off the scanner when
you clean the Feed rollers or Eject
rollers.

■ Cleaning Materials

Cleaning
Parts No.
Materials
Cleaning sheet
CA99501-
0016
Cleaner F1
CA99501-
(or isopropyl
0013
alcohol)
Cleaner F2
CA99501-
0014
Cotton swab
Commercially available
Lint-free dry
cloth
For details about the cleaning materials, contact the
FUJITSU scanner dealer where you purchased the scan-
ner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-
ened with the Cleaner F1.
The Feed roller must be cleaned with a lint-free cloth
moistened with the Cleaner F2.
DAILY CARE
Remarks
20 sheets/pack
For the cleaning method,
refer to "4 Daily Care in
the fi-5900C Operator"s
Guide.
1 bottle
Moisten a cloth with this
fluid and wipe the scan-
ner to clean.
1 bottle
Moisten a cloth with this
fluid and clean metal
rollers only.(Do not use
for any other parts.)
fi-5900C Image Scanner Getting Started
■ Locations and Cycle for Cleaning
Part to clean
Pad
Pick rollers
Brake roller
Separator rollers
Feed rollers
Pinch rollers
Transport path
Glass
Skew-detection sensor
Document sensor
The scanner must be cleaned more fre-
ATTENTION
quently if you scan any of the following
type of sheets:
Documents of coated paper
Documents that are almost completely
covered with printed text or graphics
Chemically treated documents such
as carbonless paper
Documents containing a large amount
of calcium carbonate
Documents written with pencil
For details on the cleaning the ADF, refer to "4.Daily
Care" in the fi-5900C Operator's Guide on the Setup
CD-ROM".
Standard Cleaning Cycle
Clean these parts after every
10,000 scans.
4
AP-