Fujitsu FI-800R Handbuch zum Austausch von Verbrauchsmaterialien und zur Reinigung - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch zum Austausch von Verbrauchsmaterialien und zur Reinigung für Scanner Fujitsu FI-800R herunter. Fujitsu FI-800R 19 Seiten. Image scanner
Seite drucken
Daily Care
This section describes how to clean the scanner.
●
CAUTION
●
Cleaning
Materials
Name
Cleaner F1
Cleaning Sheet
Cleaning Wipe
Cotton swab
Dry cloth
ATTENTION
In order to use the cleaning materials safely and correctly, read the precautions on each
product thoroughly.
For more information about the cleaning materials, contact the distributor/dealer where you
purchased this product. Refer to the contact information in the Contact List or the Contact
for Inquiries section in Safety Precautions bundled with this product and make an inquiry.
Do not use aerosol spray or spray that contains alcohol. Paper dust blown
up by strong air from the spray may enter inside the scanner, which may
cause the scanner to fail or malfunction.
Also note that sparks generated by static electricity may cause a fire.
The inside of the ADF becomes very hot when the scanner is being used.
Before you start cleaning the inside of the ADF, make sure to turn off the
power, unplug the power cable and wait for at least 15 minutes for the
inside of the ADF to cool down.
Part No.
PA03950-0352
CA99501-0016
PA03950-0419
Commercially
Available
Notes
100 ml
Liquid cleaner to use for removing dirt and stains
20 sheets/pack
This is an A4 size-cleaning sheet.
Use two sheets to clean once.
24 packets
Pre-moistened with Cleaner F1. It can be used
instead of moistening a cloth with Cleaner F1.
Used to clean a tiny part such as the
document sensor.
Used to wipe off dirt and stains. Moisten it
with Cleaner F1 for cleaning.