- ページ 2

スキャナー Fujitsu FI-800RのPDF 消耗品交換・クリーニングマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu FI-800R 19 ページ。 Image scanner

Daily Care

This section describes how to clean the scanner.

●

CAUTION

●

Cleaning

Materials

Name

Cleaner F1

Cleaning Sheet

Cleaning Wipe

Cotton swab

Dry cloth

ATTENTION

In order to use the cleaning materials safely and correctly, read the precautions on each

product thoroughly.

For more information about the cleaning materials, contact the distributor/dealer where you

purchased this product. Refer to the contact information in the Contact List or the Contact

for Inquiries section in Safety Precautions bundled with this product and make an inquiry.

Do not use aerosol spray or spray that contains alcohol. Paper dust blown

up by strong air from the spray may enter inside the scanner, which may

cause the scanner to fail or malfunction.

Also note that sparks generated by static electricity may cause a fire.

The inside of the ADF becomes very hot when the scanner is being used.

Before you start cleaning the inside of the ADF, make sure to turn off the

power, unplug the power cable and wait for at least 15 minutes for the

inside of the ADF to cool down.

Part No.

PA03950-0352

CA99501-0016

PA03950-0419

Commercially

Available

Notes

100 ml

Liquid cleaner to use for removing dirt and stains

20 sheets/pack

This is an A4 size-cleaning sheet.

Use two sheets to clean once.

24 packets

Pre-moistened with Cleaner F1. It can be used

instead of moistening a cloth with Cleaner F1.

Used to clean a tiny part such as the

document sensor.

Used to wipe off dirt and stains. Moisten it

with Cleaner F1 for cleaning.