A-M Systems 2200 Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kontrolleinheit A-M Systems 2200 herunter. A-M Systems 2200 19 Seiten. Analog stimulus isolator

Seite drucken
A-M Systems 2200 Gebrauchsanweisung
Pin Number
1
2
3
4
5
6
7
8
9
All signals are active-high.
The accessory cable #851000 gives a connection to the Gate signal (and ground) only
Do not connect the Battery/Test signal permanently low: this would reduce battery charge
life, and prevent real output errors from being detected. Do not connect anything to pin 5
of DB-9 connector without consulting A-M Systems, or its representative.
A-M Systems
In/Out
O
O
I
O
I
PO BOX 850, Carlsborg, WA 98324 USA
Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525
E-mail: [email protected] * Website: http://www.a-msystems.com
Pin Name
Battery OK
Output Error
Ground
Gate
VCC
(do not connect to any other device)
Battery Test
Ground
No Connection
No Connection
5