Brother Quattro 6000D Benutzerhandbuch - Seite 19

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Software Brother Quattro 6000D herunter. Brother Quattro 6000D 48 Seiten. Kit de actualización iii
Auch für Brother Quattro 6000D: Handbuch (42 seiten), Betriebshandbuch (50 seiten), Betriebshandbuch (6 seiten), Betriebshandbuch (29 seiten), Betriebshandbuch (21 seiten), (Englisch) Gebrauchsanweisung (49 seiten), (Englisch) Gebrauchsanweisung (21 seiten), (Englisch) Gebrauchsanweisung (48 seiten)

Note

• If the next pattern and the centers of the large circles

of the two positioning stickers do not fit within the

embroidering area, use a larger embroidery frame. If

a larger embroidery frame cannot be used, continue

to step

POSITION OF A STICKER" on page 22 to

reposition the sticker.

• If the sticker peels off during this procedure, the

patterns cannot be connected. In that case, restart

the procedure from the beginning.

Select the second pattern, and then continue

to the sewing screen. For this example, select

the same pattern as the first one.

When the pattern connection setting screen

(screen for connecting the selected pattern to

the previous one) appears, select the

reference edge and reference point for

connecting the first pattern, and then press

. Since, in this example, we will

connect the center point of the top edge for

the second pattern with the center point of

the bottom edge for the first pattern, select

the center point of the top edge, and then

press

, and then refer to "CHANGING THE

Reference edge and reference point

Second pattern (B)

First pattern (A)

Note

• In this screen, the reference edge and reference

point of the first pattern can be changed. For details,

refer to "CHANGING THE REFERENCE EDGE

AND REFERENCE POINT FOR CONNECTING

THE NEXT PATTERN AFTER A PATTERN HAS

BEEN EMBROIDERED" on page 29.

• If the positioning stickers do not fit within the

embroidering area, refer to "CHANGING THE

POSITION OF A STICKER" on page 22 to

reposition the sticker.

• Using

and

in this screen, the position of

the second pattern can be changed. For details,

refer to "SLIDING THE POSITION OF THE

PATTERN TO BE CONNECTED" on page 32.