Note
• If the next pattern and the centers of the large circles
of the two positioning stickers do not fit within the
embroidering area, use a larger embroidery frame. If
a larger embroidery frame cannot be used, continue
o
to step
POSITION OF A STICKER" on page 22 to
reposition the sticker.
• If the sticker peels off during this procedure, the
patterns cannot be connected. In that case, restart
the procedure from the beginning.
n
Select the second pattern, and then continue
to the sewing screen. For this example, select
the same pattern as the first one.
o
When the pattern connection setting screen
(screen for connecting the selected pattern to
the previous one) appears, select the
reference edge and reference point for
connecting the first pattern, and then press
. Since, in this example, we will
connect the center point of the top edge for
the second pattern with the center point of
the bottom edge for the first pattern, select
the center point of the top edge, and then
press
18
, and then refer to "CHANGING THE
.
a
Reference edge and reference point
b
Second pattern (B)
c
First pattern (A)
Note
• In this screen, the reference edge and reference
point of the first pattern can be changed. For details,
refer to "CHANGING THE REFERENCE EDGE
AND REFERENCE POINT FOR CONNECTING
THE NEXT PATTERN AFTER A PATTERN HAS
BEEN EMBROIDERED" on page 29.
• If the positioning stickers do not fit within the
embroidering area, refer to "CHANGING THE
POSITION OF A STICKER" on page 22 to
reposition the sticker.
• Using
and
in this screen, the position of
the second pattern can be changed. For details,
refer to "SLIDING THE POSITION OF THE
PATTERN TO BE CONNECTED" on page 32.
c
a
b
페이지 인쇄