Fujitsu D1837 Technisches Handbuch - Seite 28

Blättern Sie online oder laden Sie pdf Technisches Handbuch für Hauptplatine Fujitsu D1837 herunter. Fujitsu D1837 48 Seiten. Siemens

Add-on modules / Upgrading

Exit energy-saving mode, switch off the system and remove the power plug from the

mains outlet, before carrying out any of the procedures described in this chapter!

Even when you have run down the device, parts of the device (e.g. memory modules, PCI

extension boards) are still energised.

Technical data

●

Intel Pentium 4 with 533 or 800 MHz front side bus in the LGA775 design.

●

A current list of the processors supported by this mainboard is available on the Internet at:

www.fujitsu-siemens.com/mainboards.

Never touch the underside of the processor. Even minor soiling such as grease from the

skin can impair the processor's operation or destroy the processor.

Place the processor in the socket with extreme care, as the spring contacts of the socket

are very delicate and must not be bent.

►

Remove the heat sink.

►

Press down the lever (1) and unhook it.

►

Fold up the frame.

►

Remove the old processor (2) from the socket.

A26361-D1837-Z120-1-7419, Edition 1

English - 19